CHILD ANTI-TAMPER,
KEYPAD LOCK/UNLOCK
To lock the keypad, press the
and
buttons and hold them
down for 10 seconds. The padlock
symbol
appears on the display,
the keypad is locked.
To unlock the keypad, press the
for 10 seconds again. The padlock symbol
keypad is unlocked.
Important: when the keypad is
locked, only the button (switch) is
active.
If the device is on Standby mode when the
keypad is locked, you have to unlock it for the
next heating on to access the setup.
DAY AND DAILY PROGRAMME
INTEGRATED, ENERGY SAVINGS
AUTOMATIC PROGRAMMING WITH SELF-LEARNING
PROCESS
This feature is available on products equipped with occupancy detector.
Important:
To ensure the auto-programming is optimized, please en-
sure the presence detection sensor is not interrupted by an external
source,
see important information concerning the presence detection
M16MI328 A01_01/18
3
and
buttons hold them down
disappears from the display,
3
Example of display
in Comfort period
3
Example of display
in Eco period
system on page
10.
When the product is in Frost protection mode or in standby mode for
more than 24 hours, learning and optimization of the intelligent pro-
gram stops:
- Example 1:
- Example 2:
In the case of control by pilot wire
DAY AND DAILY PROGRAMME
In this mode, you have the option of programming your device, by
setting one of the ve programmes on off er for each day of the week.
From Auto, Comfort, Eco or Frost protection mode, press
seconds to enter into the programming mode.
Schematic sequence of programming settings:
From Auto, Comfort, Eco or Frost protection mode, press
seconds.
The cursor moves to the setting day and time mode.
1
1
EN
or 5
for 5
6