vogelundnoot BLOWER 950W Notice D'utilisation page 12

OPTIONAL: REMOTELY MANAGEMENT BY RF
REMOTE CONTROL
Your device can be managed by a wireless RF remote control.
The remote control and the blower are not bonded together at the
factory, then proceed as follow:
2-
3-
You can check at any time the RF transmission performance between
the blower and the remote control.
To view the RF reception level, from Frost protection mode, press
for 5 seconds. Then the level appears on the display.
To improve the RF transmission performance between the 2 de-
vices and ensure the remotely management is optimized:
- Please ensure the RF transmission is not interrupted, move the
M16MI328 A01_01/18
remote control.
- Move the remote control closer to the blower.
You can cancel at any time the RF transmission between the blower and
the remote control.
From Frost protection mode press simultaniously on
5 seconds.
The symbol disappear from the display, the remote control and the
blower are not associated.
EN
and for
12