Water Pipe Installation; Material And Dimensions Of The Pipes; Joining The Pipes; Wiring Chart - Olimpia splendid Ci2 wall Instructions Pour L'installation

4 - WATER PIPE INSTALLATION

4.1 - MATERIAL AND DIMENSIONS OF THE PIPES

Material of the pipes
Model
Coiled connection
(flat plate)

4.2 - JOINING THE PIPES

Connection of the water pipe should be done by profes-sionals.
Double-span should be used when connecting pipes of In-door Unit.
NOTE:
For the hydraulic connection of the conditions fitted with butterfly valve, consult
the relative installation instructions.
At the first debugging, completely expel
air from coils via expelling valve (S)
(fig.11).

5 - WIRING CHART

• THE RESERVED FUNCTION IS INDICATED IN BROKEN LINE TABLE, USERS
CAN SELECT IT WHEN NECESSARY.
• AN ALL-POLE DISCONNECTION DEVICE WHICH HAS AT LEAST 3MM
SEPARATION DISTANCE IN ALL POLE AND A RESIDUAL CURRENT
DEVICE(RCD)WITH THE RATING OF ABOVE 10MA SHALL BE INCORPORATED
IN THE FIXED WIRING ACCORDING TO THE NATIONAL RULE.
• THE APPLIANCE MUST BE INSTALLED PURSUANT TO THE NATIONAL
REGULATIONS IN FORCE REGARDING ELECTRIC WIRING.
a. Take out the faceplate (Z), then dismantle the cover (K) of the electrical box (fig.12).
Copper pipe
45.2/51/68
3/4"
E
3-way valve
(4 doors)
Connector
85/102
3/4"
D
Exhaust valve
> > > > >
EN - 15