Spektrum AR12120 PowerSafe Guide De L'utilisateur page 9

Installing the PowerSafe Main Unit
1. Using foam or thick double-sided foam tape and tie wraps, secure the
main PowerSafe unit in the position where you would normally mount the
receiver.
2. Mount the switch on the side of your aircraft and insert the switch plug in the
port in the main unit marked SWITCH.
The PowerSafe uses a specifically designed switch. Conventionally wired switches
are not compatible with the PowerSafe.
Installing Optional X-Plus 8 Module
When using an X-Plus
module be mounted as close to the receiver as possible. When using the X-Plus
power jumper lead mounting the X-Plus 8 module close will minimize the current
loss from the receiver. Servo extensions can be use with each servo, it is reco-
mmended to use heavy 22 gauge wire with gold plated connectors.
If an auxiliary battery or batteries are to be used there is no need for the X-Plus
power jumper. The X-Plus 8 module can be mounted as far away from the receiver
when using the auxiliary power option.
X+1
X+2
X+3
X+4
X+5
X+6
receiver and module it is recommended the X-Plus 8
™
9
X+7
X+8
BATT/JMPR
BATT/JMPR
SRXL
EN