Abicor Binzel MasterLiner Maxi Flex Mode D'emploi page 36

11 Disassembly
11 Disassembly
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Disconnect all electrical connections.
NOTICE
• Disassembly must only be carried out by qualified personnel (in Germany, see TRBS 1203).
• Please consult the operating instructions for the welding components, such as the power source,
• Observe the information provided in the following section:
 8 Putting out of operation on page EN-15
2
1
5
1 Sleeve
2 MasterLiner
Fig. 13 Disassembly
1 Hold the connection sleeve (3) tightly and twist the sleeve (1) clockwise to unlock it.
2 Remove the MasterLiner (2), wire and parts to be disassembled.
EN - 18
DANGER
welding torch system, re-circulating cooling unit etc.
3 2
3 Connection sleeve
4 Wire feed
MasterLiner Maxi Flex/HD; Basic Flex/HD
1 3
5 Wire drum
4