Functional Description; System Overview En - Abicor Binzel MasterLiner Maxi Flex Mode D'emploi

MasterLiner Maxi Flex/HD; Basic Flex/HD
4.2 Storage
For ambient conditions for storage in a closed environment, see:
 Tab. 2 Ambient conditions for transport and storage on page EN-4

5 Functional description

The MasterLiner consists of individual segments that can each be rotated by 360°. Each segment contains
four rollers that make it possible to almost seamlessly feed the wire from the available wire container (drum/
spool) to the wire feeder.
When using two wire feeders, the MasterLiner is installed in the middle.
5.1 System overview
NOTICE
• Note the bending radius directly after the wire feeder. We recommend mechanically securing the
• When using the MasterLiner Basic, note the wire feed direction.
1
2
3
4
5
1 Welding robot
2
Wire feeder
Fig. 4 Robot welding cell setup
MasterLiner in such a manner that the robot's movement does not transfer any bending and tensile
forces that occur to the MasterLiner.
3 MasterLiner 4 MasterLiner to wire drum
connection
5 Wire drum
EN - 9