Pioneer AVIC-N2 Manuel D'installation page 9

30-pin cable (supplied)
3 m (9 ft. 10 in.)
Black
IP-BUS cable
(supplied with TV tuner)
Hide-away XM tuner
(GEX-P10XMT)
(sold separately)
Black
Black
Note:
The XM tuner will not receive XM Radio service when
you drive outside of the XM's coverage area. When the
XM tuner is not used, connect the IP-BUS cable*1
directly to the navigation's Hide-away unit*2.
Note:
When Pioneer multi-channel processor (sold separately) is
connected to this unit, make sure the "5.1 CH" mode is acti-
vated. Please find the correct setting by referring to
"Switching the 5.1ch setting" in the "Operation Manual" of
the navigation system.
Display unit
Yellow
Power cord
Blue
*1
WIRED
REMOTE
Please see the Instruction
Manual for the Wired Remote
Control (sold separately).
MIC INPUT
The microphone in the voice
recognition kit (e.g. CD-VC1)
(sold separately) is connected
when the voice recognition
function is used.
DIGITAL OUT
This is used when connecting
to the Pioneer multi-channel
processor (sold separately),
that is compatible with this unit.
Otherwise this is not used.
G.SP (Guidance speaker output)
This is not used normally.
When combining this unit with
Pioneer multi-channel processor
(sold separately) that is compatible
with this unit, G.SP will be used to
output the guidance voice.
In this case, the Pioneer external
speaker (e.g. CD-TS37GP) (sold
separately) must be connected to
the SP-OUT jack (2.5 ø MINI JACK,
1W max [16 Ω]).
For details, see the operation manual
of the external speaker.
XM DATA cable
(supplied with XM tuner)
• When combining this unit with GEX-P10XMT
(sold separately), this connection must be
required.
• When installing the XM tuner in the trunk, etc.,
the extension cable (e.g. CD-600DC) (sold
separately) is required.
8