Assembly Of The Rotor With The Rubber Motor - Reely Sky Sedan Notice D'emploi

f) Assembly of the Rotor with the Rubber Motor
Knot the two ends of the drive rubber (1) so that a closed
loop results.
Take this loop threefold and hook in the rubber from below
into the hind-most fuselage opening. Slide the rubber holder
through the fuselage as indicated in the figure.
Use the insertion hook (1) to insert the drive rubber through
the fuselage from the front now. Hook the rotor unit (2) into
the rubber and press it into the fuselage.
Attach the spinner cap (1) to the rotor (2) and press it on.
20
Figure 7
Figure 8
Figure 9