ACteon Sopro 717 First Manuel D'utilisation page 7

device treatment, recuperation and recycling, please contact your dental device distributor (or failing that, the
group ACTEON site), so that you can be informed of the procedure.
4.5. ELECTROMAGNETIC COMPTABILITY
Guide and declaration of the manufacturer - electromagnetic emissions
SOPRO device is intended to be used in the electromagnetic environment specified below.
Emission trial
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
EN 61000-3-2
Voltage fluctuations / Flicker
EN 61000-3-3
6
S o p r o 7 1 7 F i r s t • U s e r ' s m a n u a l • 2 0 1 0 - 0 3 - 2 6
E N G L I S H
The user should make sure it is used in this environment.
Compliance
Group 1
Class B
Not applicable
Applicable
Electromagnetic environment - Guide
SOPRO device only uses radio energy for its
internal functions. Therefore, its RF emissions
are very low and are unlikely to cause
interference with nearby electronic devices.
SOPRO device may be used in all domestic
environments, including the ones directly
connected to the public low voltage power
distribution network used to supply household
buildings.