Functional Description; Use For Intended Purpose; Electrical Connection And Operation; Extension Cable - Festool HL 850 E Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to the
State of California) to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other
masonry products,
• Arsenic and chromium from chemically-treated
lumber.
1.1
Lock off button
1.2
On/Off switch
1.3
Shavings ejector
1.4
Shift lever for shavings ejector
1.5
Spindle stop
1.6
Interlock for cutting depth adjustment
1.7
Cutting depth adjustment
1.8
Parking device
1.9
Handle
The HL 850 E planer together with the available
Festool accessories is designed for processing wood,
soft plastics and similar materials.
The supply voltage must comply with the voltage
given on the ratings plate.
The switch (1.2) is used as an on/off switch. For your
safety this is equipped with a switch-on interlock (1.1
). In order to run the planer the switch-on interlock
must first be pressed and then the switch.

Extension cable

If an extension cable is required, it must have a suf-
ficient cross-section so as to prevent an excessive
drop in voltage or overheating. An excessive drop in
voltage reduces the output and can lead to failure of
6

Functional description

Use for intended purpose

Electrical connection and operation

The risk from these exposures varies, depending on
how often you do this type of work.
To reduce your exposure to these chemi-
cals work in a well ventilated area and
use approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
TO REDUCE THE RISK OF IN-
JURY, USER MUST READ INSTRUCTION MANUAL.
1.7
1.6
1.5
1.4
The user shall be liable for dam-
ages and accidents due to incorrect use.
the motor. The table shows the correct size to use,
depending on cord length and tool's ampere rating.
Use only U.L. and CSA listed extension cables. Never
use two extension cables together. Instead, use one
long one.
Total Extension Cord
Lenght (feed)
Cord size (AWG)
Note: The lower the A.W.G. number, the stronger
the cable.
1.3
1.2
1.1
25
50
100
18
16
14
1.9
1.8
150
12

Publicité

Table des Matières
loading

Table des Matières