Electrical Connection; Extension Cable; Carton Contents - MIRKA MIRO 955 Notice D'utilisation

Electrical connection

The network voltage must conform to the voltage indicated on the tool name plate. Under no
circumstances should the tool be used when the power supply cable is damaged. A damaged
cable must be replaced immediately by an authorized Customer Service Center. Do not try to
repair the damaged cable yourself. The use of damaged power cables can lead to an electric
shock.

Extension cable

If an extension cable is required, it must have a sufficient cross-section so as to prevent an
excessive drop in voltage or overheating. An excessive drop in voltage reduces the output and
can lead to failure of the motor. The following table showsyou the correct cable diameter as
a function of the cable length for this machine. Use only U.L. and CSA listed extension cables.
Never use two extension cables together. Instead, use a long one.
Total Extension Cord Length (feet/meters)
100 / 30,5
150 / 45,5
200 / 61
UNPACKING
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated the ma-
chine.

CARTON CONTENTS

1. Drywall Sanding Machine
2. Vacuum cleaner hose
3. Instruction manual
4. Abranet dics 225 mm grit 120
DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND THE ENTIRE INSTRUC-
TION MANUAL
To install a sandpaper disc:
1. Unplug the machine.
2. Peel away the worn out sandpaper disc, leaving the sponge backing pad in place.
3. Carefully center the new sandpaper disc and press into place. It will be held securely by the
hook and loop backing.
25 / 7,5
50 / 15
ffi
Cord Size (AWG)
8
16
12
10
8
6