MIRKA MIRO 955 Notice D'utilisation page 6

Avoid accidental starting. Be sure switch is off before plugging in. ff Plugging in tools that
have the switch on invites accidents.
Remove adjusting keys or switches before turning the tool on. A wrench or a key that is
left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep a proper footing and balance at all times. Proper footing and bal-
ance enables better control of the tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
Tool use and care
Do not force tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally.
Store idle tools out of reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Properly maintained tools are less likely to bind and are easier to
control.
Check for misalignment or binding of moving parts, breakage of parts, and any other condi-
tion that may aff ect the tools operation. If damaged, have the tool serviced before using. Many ff ff
accidents are caused by poorly maintained tools.
Use the power tool, accessories and blades etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account
the working conditions and the work to be performed. Use of the power tool for opera-
tions diff erent from those intended could result in a hazardous situation. ff ff
Service
Have your tool serviced by a qualified repair person using only identical replacement fi
parts. This will ensure that the safety of the power tool is maintained.
-WARNING- To reduce the risk of injury, user must read instruction manual.
6