Spare parts
50010 Steaming and Cleaning Fluid
50019 Maintenance Oil
51020 Gear Lubricant
62201 Universal Motor with short
shaft
63120 Brushes with bushings,
8 pieces
(2 packages needed)
63218 Standard Pick-Up Shoes,
2 pieces
(2 packages needed)
65853 Stack, 5V
68511 Plug-In Bulb, Clear, 5V,
10 pieces
69104 Traction Tire 37.5 mm,
10 pieces
Accessories
2
17010 EPL Loco Magnet
17050 Sound Trigger Magnet
17100 EPL Track Contact
55027 MTS Onboard Decoder III
(23841)
65011 Standing Sounds Power
Supply Unit
68513 Plug-In Bulb, Clear, 24V
Index
1
= Spare part
2
= Accessories
3
= Switch-off option
4
= See Instructions for
Advanced Users
INSTRUCTIONS FOR ADVANCED
USERS
MTS Onboard Decoder
To change the functions of the MTS
Onboard Decoder as desired, config-
uration variables (CVs) can be pro-
grammed in the registers.
This option requires the following
equip ment:
- 55045 MTS PC Decoder
20
Programming Module or
- 55015 Universal Remote Control
Unit
Note:
For normal operation, it is not neces-
sary to change any function values.
Programming
Note:
Please consult the operating instruc-
tions for the
- 55045 MTS PC Decoder Program -
ming Module or
- 55015 Universal Remote Control
Unit
Original factory settings
- If programming results in unsatis-
factory operation, the original fac-
tory settings of the MTS Onboard
Decoder can be recovered for the
most important registers!
- To do this, enter function value 55
in register CV 55.
This also reprograms the loco
address to the factory-set value = 3.