Operating Personnel Requirements; Workplace Safety; Electrical Safety - Baier BMK 120 Traduction Du Mode D'emploi Original

2.1 Operating personnel
requirements
a) People below the age of 16 may not use the
unit.
b) Keep the mixing station out of the reach
of children when not in use. Do not allow
people to use the tool unless they are
familiar with it, or if they have not read this
instruction manual.
Mixing stations are dangerous, if they are used
by inexperienced persons.
c) Always work carefully, attentively and sensi­
bly when using this tool. Do not use the unit
if you are tired or are under the influence of
drugs, alcohol or medication.
A moment of inattention while using the tool can
result in serious injuries.
2.2

Workplace safety

a) Never use the power tool in potentially ex­
plosive environments containing flammable
liquids, gases or dusts.
Power tools generate sparks which can ignite
dust or vapours.
b) Avoid dust accumulation in the workplace.
Dusts can easily ignite.
c) Ensure adequate ventilation in closed
rooms.
Risk due to fumes, dust and impaired vision.
Several products can produce harmful fumes
during the mixing process. Note and follow the
safety instructions of the mix material supplier
precisely.
d) Keep your work area clean and well
illuminated.
Untidiness and unlit work areas can result in
accidents.
e) Avoid causing situations where other people
can stumble or trip.
Tripping over cables can cause serious injuries.
f) Never operate the mixing station on an
inclined, unstable or unsafe work surface
and never on a scaffold.
2.3

Electrical safety

a) The connecting plug of the power tool / the
equipment must fit in the plug socket. The
plug must not be modified in any way. Do not
use adapter plugs in conjunction with power
tools with protective earth conductor.
Unmodified plugs and properly fitting plug
sockets reduce the risk of electric shock.
b) If the standard high­speed mixer used in
the mixing station is equipped with a PRCD
personal protection switch, the high­speed
mixer must be operated with this PRCD per­
sonal protection switch. The PRCD personal
protection switch must function properly.
c) Before each use, check the mixing station,
high­speed mixer, connection cable and
plug for damage.
Damaged equipment is dangerous, and no
longer safe to use.
d) Note the mains voltage! The power source
voltage must match the details given on the
rating plate of the high­speed mixer.
e) Do not use the high­speed mixer used in the
mixing station if the cable is damaged. Do
not touch the damaged cable and discon­
nect the mains plug if the cable is damaged
while you are working.
Damaged cables increase the risk of an electric
shock.
f) Only use extension cables suitable for
the equipment's power consumption and
which have a minimum core cross­section
of 1.5 mm 2 . If you use a cable drum, always
completely unwind the cable.
The rolled up cable can heat up and start to
burn.
| 23 |