2.5.1 Service / Maintenance / Repair; Explanation Of The Pictograms On The Mixing Station - Baier BMK 120 Traduction Du Mode D'emploi Original

2.5.1 Service / Maintenance / Repair

a) Maintain the unit with care in accordance
with the stipulations of the instruction
manual. Check whether moving equipment
parts are in proper working order and do not
jam, whether parts are broken or damaged in
such a way that they impair the function of
the equipment.
Many accidents are caused by poorly main-
tained tools and accessories.
b) Repair and maintenance work may only be
carried out by an authorised service centre
of OTTO BAIER GmbH.
Otherwise, all liability and warranty claims
against OTTO BAIER GmbH expire.
c) Ensure that original BAIER spare parts and
original BAIER accessories only are used
when needed.
Original parts are available from authorised
dealers. Use of non original parts can cause
damage to the equipment and an increased risk
of accidents.
2.5.2 Explanation of the pictograms
on the mixing station
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been
subjected to the prescribed conformity
assessment procedures.
Read the instruction manual!
Before starting any work with or on the
equipment, this instruction manual, the
safety instructions and the warnings must
be read through carefully and observed.
Wear mask
Wear hearing protection
NOTE
The pictograms on the high-speed mixer are ex-
plained in the instruction manual of the high-speed
mixer used.
| 25 |