HumanTechnik lisa Mode D'emploi page 9

Congratulations on purchasing your
RF person call button/RF door push
button. We hope it will give you
many years of reassuring operation.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system's features
to you.
Included in the standard package:
Please check if all following compo-
nents are included:
- lisa RF person call button/
RF door push button
- 1.5 V battery (type: lady)
- Operating Instructions
- Warranty card
If any parts are missing please
immediately contact your dealer or
the manufacturer directly.
How it works
A signal unit consists of at least one
transmitter and one receiver. The RF
person call button/RF door push but-
ton transfers signals wire-free (radio
signal 868.35 MHz) to the receiver.
Special features
A recognised signal is transmitted
fur a duration of 15 seconds. This
increases reliability and range.
Initial operation
1. Inserting the battery
1. Release the screw on the trans-
mitter housing.
2. Remove the top of the housing.
3. Insert a new battery (ensure pola-
rity is correct!)
Battery type:
Lady
English 9