HumanTechnik lisa Mode D'emploi page 11

- Metallic objects reduce the range
due to the shielding effect of the
metal.
- Particularly in towns and cities,
there may be many other sources
of radio waves which can disrupt
the original signal.
- Having units operating at similar
frequencies located close to one
another may also result in mutual
interference.
Wall assembly (only for RF door
push button)
Please use the 5 mm wall plugs
included with the RF door push but-
ton. Use a masonry drill bit to drill
the holes required at the position
you desire (see diagram below).
65 mm
Fixing holes
Battery life
Under normal conditions (7 trans-
missions a day), the transmitter bat-
tery should last for about 1 year. To
check the level of the battery press
the transmitter's person call button. If
the "Send" signal display does not
illuminate the battery has to be
changed!
Maintenance and care
The RF person call button/RF door
push button does not require any
maintenance. If the unit does beco-
me dirty, simply wipe it clean with a
soft, damp cloth. Never use spirits,
thinners or other organic solvents.
Do not set up the RF person call but-
ton/RF door push button where it will
be exposed to full sunlight for long
periods. In addition, it must be pro-
tected against excessive heat, moi-
sture and severe mechanical shocks.
8 mm
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
Please make sure that the batteries
are not exposed to excessive heat
from such as sunlight, fire or any-
thing similar.
English 11