History - Cristec JBNUM II-CPS3 Manuel D'utilisation

HISTORY

The Battery Monitor also allows the storage of alarms detected while the monitor is
operating.
To acces to the history of a channel, when you are
1
viewing the status of your power sources and
batteries, press the button _MENU_. The setup
menu appears on the screen.
Then select the history you want to view, press
2
_ OK _.
And select the information you want to view using
3
▲ and ▼ et press _
You can then read the various information.
4
If no alarm has been detected, the symbol « -- »
appears.
There are 3 stored information:
- Number: this is the number of exceeded alarm threshold set in the channel
configuration Menu.
- Last Value: this is the last recorded alarm.
- Max Value: this is the highest recorded alarm value since the last reset of the history.
► Reset the history :
It is possible to achieve a reset when press _RESET_ when viewing the history.
This action only erases a single parameter.
OK _.
Battery Monitor JBNUM II - CPS3
53