Cristec JBNUM II-CPS3 Manuel D'utilisation page 45

- By pressing the button
channel.
- By pressing the button
channel with an interval of 4 seconds.
- In case of anomaly detection, alarm types detected are displayed:
- LOW VOLTAGE ALARM : the battery voltage is below the threshold defined by « Low
Volatge Alarm ».
- HIGH VOLTAGE ALARM : the battery voltage is above the threshold defined by « High
Volatge Alarm ».
- LOW CAPACITY ALARM: the battery capacity is below the threshold defined by « Low
Capacity Alarm ».
Example of visualization during a LOW ALARM VOLTAGE :
- When the Battery Monitor remains inactive for 10 minutes, it turns into standby mode while
monitoring the batteries still connected. This is to reduce consumption. Simply press a button
and it returns to normal operation.
Battery Monitor JBNUM II - CPS3
on the display, acces to the status display of the next
on the display, it automatically scrolls through differents
Symbol indicating the activation of
the relay (See Menu Relay
Configuration MENU)
Detected Alarm type
45