Battery Initialization - Cristec JBNUM II-CPS3 Manuel D'utilisation

► Battery Initialization

For an accure indication of the battery state, you must regularly achieve initialization of
Battery Monitor. This is possible when the battery is fully charged and when connected to
the charger, charger is in floating mode. The initialization allows to determine the full
battery state (100%).
Access to the configuration channel menu you want to
1
initialize.
Select « Initialization Battery ». And validate by pressing
2
_ OK _.
An Initialization confirmation screen will appear (for 2
3
seconds).
The Initialization is now completed.
4
For optimum operation, it is advisable to carry out an initialization at least 2 times a
year, even if your battery is fully charged.
For a proper operating, an initialization is required:
- After the 1st operating once the battery is fully charged.
- After any interruption in the power-supply of the Battery Monitor.
- After replacing the battery.
Battery Monitor JBNUM II - CPS3
51