General Settings - Cristec JBNUM II-CPS3 Manuel D'utilisation

GENERAL SETTINGS

To access to the general setup menu of the Battery
1
Monitor, when you are viewing the status of yours
power sources and batteries, press the button
_MENU_. The setup menu appears on the screen:
Then, select « General setting ».
2
You therefore have access to the configuration of
several parameters:
-
Installation type
-
Alarm type
-
Period of backlight
-
Language
-
Reset of Battery Monitor
-
Informations product
Information on the Battery Monitor configuration settings :
Parameters
Installation type
Audible Alarm
Backlight
Language
RESET
Informations product
Choice of settings
• Not Connected
• Battery
• Solar Panel
• Wind Generator
• Alternator
• Other energy source
• ON
• OFF
• OFF
• 1 à 10 min
• French
• English
-
-
Battery Monitor JBNUM II - CPS3
Principle
You can configure the type of installation being
monitored.
When the Battery Monitor detects an alarm, its
warns the user :
ON : audible Alarm actived.
OFF : audible Alarm disabled
information ( flashing the backlight).
You can turn off the backlight, or adjust its
duration from 1 to 10 minutes.
You can select your language for the menu :
french / english.
It is possible to reset the Battery Monitor. This
realizes a total clearing of memory (user
settings and the historic alarms). The
parameters stored are the defaults.
Product reference and software version.
49
Visual