Safety Labels - EMAK OM 98L/14,5H Manuel D'utilisation

1.3 SAFETY LABELS

Your machine must be used with care. This is
why labels with illustrations have been placed on
the machine, to remind you of the main precau-
tions to take during use.
1
2
3
4
5
6
7
8
max 245 N (25 kg)
These labels are to be considered an integral
part of the machine.
Should a label come off or become illegible, con-
tact your dealer to replace it. Their meaning is
explained below.
1 Warning: Read the instructions before oper-
ating this machine.
2 Danger! Ejected objects: Do not without
side discharge chute in place.
3 Danger! Ejected objects: Keep bystanders
away.
4 Warning: Disconnect the ignition key and
read the instructions before carrying out any re-
pair or maintenance work.
5 Danger! Machine rollover: Do not use this
machine on slopes steeper then 10°.
6 Danger! Dismemberment: Make sure that
children stay clear of the machine at all time
when engine is running.
7 Danger of cutting yourself. Blades in
movement. Do not put hands or feet near or
under the opening of the cutting plate.
8 Warning! - Keep away from hot surfaces.
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on
request.
This accessory is to be fitted following the
instructions pro vided. When using the towing kit,
do not exceed the recommended loads stated
on the label and follow the safety instructions.
EN 5