Safety Labels - EMAK 102 Manuel D'utilisation

1.3 SAFETY LABELS

Your machine must be used with care. This is why labels with
illustrations have been placed on the machine, to remind you of
the main precautions to take during use.
These labels are to be considered an integral part of the
machine. Should a label come off or become illegible, contact
your dealer to replace it. Their meaning is explained below.
1
3
5
Warning: Read the instructions before operating this ma-
1
chine.
Warning: Disconnect the ignition key and read the instruc-
2
tions before carrying out any repair or maintenance work.
EN 6
2
4
6
Danger! Ejected objects: Do not operate without the
3
stone-guard or grass-catcher in place.
Danger! Ejected objects: Keep bystanders away.
4
Danger! Machine rollover: Do not use this machine on
5
slopes steeper then 10°.
Danger! Dismemberment: Make sure that children stay
6
clear of the machine at all time when engine is running.
7
8
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on request.
This accessory is to be fitted follow-
ing the instructions provided.
When using the towing kit, do not
exceed the recommended loads stat-
ed on the label and follow the safety
instructions ( 1.2, C-6).
Danger of cutting yourself.
7
Blades in movement. Do not put
hands or feet near or under the
opening of the cutting plate.
Warning! Keep away from hot
8
surfaces.