Controls And Instruments; Key Ignition Switch; Steering Wheel; Parking Brake - EMAK OM 98L/14,5H Manuel D'utilisation

4. CONTROLS AND INSTRUMENTS

4.1
4.2
4.2a
4.6
4.32

4.1 STEERING WHEEL

Turns the front wheels.
4.2 THROTTLE
This regulates the engine's r.p.m. The positions
are indicated on a plate showing the following
symbols:
4.2a
4.2
«CHOKE» cold starting
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
EN 10
– The «CHOKE» position enriches the mixture
so must only be used for the time necessary
when starting from cold.
– When moving from one area to another, put
the lever in a position between «SLOW» and
«FAST».
– When cutting, shift into «FAST».
4.21-4.31
4.31
4.2A CHOKE CONTROL (IF FITTED)
It enriches the mixture and must only be used for
4.5
the necessary time for cold starting.
4.3
1
4.4
4.22

4.3 KEY IGNITION SWITCH

This key operated control has four positions:
«OFF» everything
is switched off;
«HEADLIGHTS
ON» (if fitted);
«ON» activates all
parts;
«START» con-
nects the starter
motor.
– If you release the key
on «START», it will
automatically return
to «ON».
– After turning the engine on, turn the lights
on (if fitted) by turning the key to the
«HEADLIGHTS ON» position.
– to switch them off, turn the key to «ON».

4.4 PARKING BRAKE

This brake stops the machine from moving when
it has been parked.
There are two positions:
4.3