Machine Operation; Operating Machine - Cleanfix RA705 IBC Mode D'emploi

MACHINE OPERATION

PRE—OPERATION CHECK
1. Check the battery power.
2. Check whether the power supply of the tow line
is properly connected.
3. Check the wear of the cleaning pad/brush.

OPERATING MACHINE

1. Turn right the key.
2. Push the One-click cleaning
button.
3. Lower the squeegee assembly
to floor by stepping on foot ped-
al . To raise squeegee assembly,
place foot under foot pedal and
lift. The vacuum motor will auto-
matically start when squeegee
is lowered to floor.
4. Check the wear and tear of the squeegee and
adjust the angle properly.
5. Ensure that the sewage tank is empty and that the
floating filter is installed and clean.
6. Check the wear and tear of the brush skirt.
4. To begin scrubbing, pull the
start bail.
5. Regulating water volume.
6. Adjust the brush pressure.
7. Forward/back (driving)
9. Speed adjustment (driving)
English | 31 | 31 | 31