Correct Use; Product Liability; Sources Of Risk; Machine Operation Position - Cleanfix PowerDisc LS Mode D'emploi

No methods involving safety risks must be employed. The use of automatic machines on public paths and
roads is prohibited.
The high speed single disc machine PowerDisc HS, must not be used for wet cleaning (deep cleaning and
shampooing).
This machines is made for professional use e.g. Hotels, Schools, Hospitals, Factories, Shops, Offices, and
Renting or Leasing Business.

Correct use

All single-disc machines are intended exclusively for use in building interiors.
Any use beyond this is considered incorrect. The manufacturer accepts no liability for any resultant damage;
the user alone bears the risk.
Correct use also includes adherence to the operating, servicing and maintenance conditions recommended by
the manufacture.
The relevant accident prevention regulations as well as all the generally acknowledged safety and working
practices must be followed.
Unauthorized modifications to the machine exclude the manufacturer's liability for resultant damage.
Before machine use, floor coverings must be tested for suitability for this cleaning process.
Pay attention to the area compression of point-elastic floors, e.g. in gymnasiums.
The manufacturer accepts no liability for damage to equipment and to the floor being cleaned from using the
wrong brushes and cleaning agents.
Only use the brushes provided with the appliance or those specified in the instructions. The use of other
brushes may impair safety.

Product liability

The operator's attention is drawn explicitly to the fact that the machines may only be used for their intended
purpose. If the machines are not used for their intended purposes, the user must accept full responsibility.
Any liability of the manufacturer is thus excluded.

Sources of risk

When the machine is stationary, the brush unit must be immediately switched off to prevent damage to the
floor covering.
During transportation in lifts, the currently valid user instructions and safety regulations – and particularly
those concerning maximum loading – must be observed.
Do not allow the supply cord to come into contact with the rotating brushes or pad.

Machine operation position

The machine operation position is behind the machine.

Approved maintenance staff

The single-disc machine may only be serviced and repaired by per-sons with technical and legal authorization.
English | 13