While Operating Machine; Draining Tanks; Draining Recovery Tank - Cleanfix RA705 IBC Mode D'emploi

WHILE OPERATING MACHINE

WARNING: Flammable materials or reactive metals can cause an explosion or fire. Do not pick up.
1. Overlap each scrub path by 5 cm.
2. Keep machine moving to prevent damage to floor finish.
3. Wipe squeegee blades with a cloth if blades leave streaks.
4. Avoid bumping the machine into posts and walls.
FOR SAFETY: When operating machine, do not exceed the gradients of 2%.
5. Pour a recommended foam control solution into the recovery tank if excessive foam appears.
ATTENTION: Foam build-up will not activate the float shut-off screen, vacuum motor damage will result.
6. Use the double scrubbing method for heavily soiled areas. First scrub the area with the squeegee up, let
solution set for 3-5 minutes, then scrub the area a second time with squeegee down.
EMERGENCY SHUT-OFF BUTTON
Push the emergency shut-off button in the event of an emergency.
This red button shuts off all power to machine. To regain power,
turn the button clockwise and restart the key.

DRAINING TANKS

FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, remove key and
set parking brake if equipped.

DRAINING RECOVERY TANK

Drain the recovery tank daily.
1. Transport the machine to drain area. For models
equipped with drain hose caps, hold the hose up-
ward, remove cap then slowly lower hose to drain.
For models equipped with flow control valve drain
hose, lower hose and slowly open valve to drain.
NOTE: When using a bucket to drain the machine,
do not use the same bucket to fill the solution tank.
32 | 32 | 32 | English
2. Remove and clean the float shut-off screen.
3. Remove the debris tray and empty.
4. Rinse out the recovery tank with clean water and
wipe clean of any soil residue.