Brush And Pad Information; Machine Setup - Cleanfix RA705 IBC Mode D'emploi

BRUSH AND PAD INFORMATION

For best cleaning results use the appropriate brush or pad for your cleaning application. Listed below are
brushes and pads and the applications for which each is best suited.
NOTE: The amount and type of dirty play an important role in determining the type of brush or pad to use.
Contact a Cleanfix representative for specific recommendations.
Nylon bristle scrub brush
Recommended for cleaning coated floors without removing finish. Cleans without scuffing.
Driving disc
There are small hooks on the driving disc that hold the pad in place.
Pad (White)
Used to maintain a highly polished or polished ground.
Polished pad (red)
Used for light load floor cleaning.

MACHINE SETUP

ATTACHING SQUEEGEE ASSEMBLY
1. Lift the squeegee mount bracket to the raised
position. Place foot under pedal to lift.
2. Mount the squeegee assembly to the squeegee
mount bracket . Tighten knobs to secure squeegee
assembly to bracket.
3. Tighten the middle two-star knob clockwise and
fasten the suction grilled assembly to the shelf.
4. Connect the vacuum hose to the squeegee
assembly.
English | 29 | 29 | 29