Monitor Settings - Extel MN IRON 2 Guide D'installation Et D'utilisation

- To refresh the picture for an additional 30 seconds, press the
- If you have a second intercom panel or a surveillance camera as an option, press a second time on this
to view them.
If you press the
- To activate the monitoring function, press the key
- To control the strike plate or lock, press the
- To control an automatic opener, press the
Intercommunication mode
• The key allows you to call the additional monitor and to establish a connection, if the monitor being called
also presses the
• Pressing the key once ends the conversation.
Note that the opener functions are only available when the screen is turned on. The picture disap-
pears briefly when the control is activated
b. Monitor settings
GENERAL:
• To access the videophone settings menu, press the
• After completing the configuration, press
•Video settings:
To access the video settings, select "Video" and press
ou can configure the video settings by pressing
confirm your settings by pressing
- "Brightness": Brightness
- "Contrast": Contrast
- "Color": Colour
•Audio settings:
To access the audio settings, select "Audio" using the
You can configure the audio settings by pressing
confirm your settings by pressing
"Select melody": Select melody
"Melody Volume": Melody Volume
GB4
key twice and the camera is not connected, the screen will be blank.
key.
:
:
CFI EXTEL MN IRON 2 - V1 - 01/2013
key.
key.
key.
key .
to confirm and to return to the previous menu.
.
again, navigate in the menus using the
key, and press
, navigate in the menus using the
and
.
and
key
keys,
keys,