Settings Of The Mobile Handset - Extel TOPTEL 200 Guide D'installation Et D'utilisation

• Searching / paging the mobile handset
With the "Paging" function, you can control the function and the link of all registered mobile handsets. Each mobile
handset emits a trill sound to confirm the connection to the base station.
1. Press the key Page
2. The mobile handsets are then called.
3. To stop the paging sound, press any key on the mobile handset.
c. Settings of the mobile handset
• Settings of the ring tone of the mobile handset
• Automatic communication answering
When the automatic communication answering is enabled, the incoming calls will be automatically answered as
soon as the handset is picked up from the charging station.
1. Press [Menu] to access the main menu. Go to the symbol
Then press [OK] to open the setting menu.
2. Go to the menu "Mobile handset" and press [OK].
3. Go to the menu "Automatic communication answering" and press again [OK].
4. Use the keys to select "enabled" or "disabled" and confirm with [OK].
• Setting the contrast of the mobile handset screen
1. Press [Menu] to access the main menu. Go to the symbol
2. Go to the menu "Mobile handset" and press [OK].
3. Go to the menu "LCD contrast" and press again [OK].
4. Use the keys to select "Level 1", "Level 2" or "Level 3" and confirm with [OK].
• Enabling / disabling the key tone
1. Press [Menu] to access the main menu. Go to the symbol
2. Press [Menu] to access the main menu. Go to the symbol .... Then press [OK] to open the setting menu.
2. Go to the menu "Mobile handset" and press again [OK].
3. Go to the menu "Key tone" and press again [OK].
4. Use the keys to select "enabled" or "disabled" and confirm with [OK].
• Setting the display / menu colour
The upper and lower areas can be displayed in 30 variants of different colours.
1. Press [Menu] to access the main menu. Go to the symbol
2. Go to the menu "Mobile handset" and press [OK].
3. Go to the menu "Colour menu" and press again [OK].
4. Use the keys to select one of the variants of colour and confirm with [OK].
20GB
on the front side of the base station.
1. Press [Menu] to access the page of symbols. Go to the symbol
to open the ring tone menu.
2. Then the ring tone is played. Use the keys
3. Use the keys to set the volume of the ring tone in the "Volume" function.
4. Press [OK] to confirm the changes, or [Return] to exit the menu without saving.
Indication : The volume of the ring tone can be set from 1 to 5. (5 = the highest sound.
1 = the lowest sound).
CFI EXTEL TOPTEL200- 02/2010 - V1
to select another melody.
.
.
. Then press [OK] to open the setting menu.
. Then press [OK] to open the setting menu.
. Then press [OK]