Description Of Tumble Dryer Pt 8301 - Miele professional PT 8301 SL Mode D'emploi

Control panel PT 8301 Profitronic B Timed programs
3
1 Segment display - Time
4 Venting system fault indicator
7 Time selection jog shuttle
On/Off switch s
Turns the machine on or off.
Temperature selection button
For setting the required drying temperature - Cold,
Low, Medium, High. The corresponding LED will
light up.
Time selection jog shuttle u
Program durations of up to 60 minutes can be selec-
ted in five minute stages from 5 to 60 minutes to suit
different fabric types and depending on how the laun-
dry is to be further processed. The corresponding
LED will light up. The drying duration can also be al-
tered during the drying process.
START/STOP button
Press the Start/Stop button to start or stop the drying
program.
1 2
4 5 6
2 Program sequence display
5 Lint filter fault indicator
8 On/Off switch

Description of tumble dryer PT 8301

7
3 Temperature selection button
6 START/STOP button
Segment display
Before the start of a program this shows the selected
drying duration in minutes.
After the start of a program it shows the time left to
the end of the program.
It also shows fault messages, see "Problem solving
guide".
It can also show h for "Peak load cut-out" (optional).
Program sequence display
The program sequence is displayed in three stages.
The stage the program is at will be highlighted in yel-
low.
!
Drying
L
Cooling down
O
Program finished / Anti-crease
Check venting system 0 fault indicator
This will light up if there is a problem with the venting
system.
Clean the lint filter W fault indicator
This will light up when the lint filter needs to be clea-
ned.
8
7