After Drying; Interrupting A Program; Adding Or Removing Items - Miele professional PT 8301 SL Mode D'emploi

At the end of the program
^ Open the drum door.
If the door remains closed, the dryer will start up
again briefly after an interval of 30 minutes for sa-
fety reasons.
^ Unload the drum.
Make sure nothing is left behind in the drum. If
items are left in the dryer, they could be damaged
by overdrying when the dryer is next used.
^ Check the lint filter and clean it if necessary. Close
the lint filter compartment flap to prevent anyone
tripping over it.

Interrupting a program

The program is interrupted by:
- pressing the On/Off switch s,
- opening the drum door,
- opening the fluff compartment flap.
To continue the program:
Press the On/Off switch s, or close the drum door or
fluff compartment flap.
The remaining drying duration or the target residual
moisture level will flash in the segment display, and a
cooling-down phase will follow the end of the pro-
gram.
^ Press the START/STOP button.
,
Do not unload laundry from the drum until after
the cooling down phase has been completed.
Hot laundry can self-ignite and cause a fire when
folded or put away.

Adding or removing items

The drum door can be opened during a drying pro-
gram to remove or add items if necessary.
,
Always make sure that the drum is stationary
before reaching into the machine to remove laun-
dry. Reaching into a moving drum is extremely
dangerous.
To continue the drying program:
^ Close the drum door.
The remaining drying duration or the target residual
moisture level will flash in the segment display.
The fan will switch itself on automatically if the tempe-
rature in the drum is too high.
^ Press the START/STOP button to continue the pro-
gram.
If no more laundry is to be processed:
^ Close the drum door.
^ Switch the dryer off by pressing the On/Off switch
s
^ Turn off the electrical supply..

After drying

13