Installation And Connection - Miele professional PT 8301 SL Mode D'emploi

This dryer must only be installed and commissio-
ned by a Miele authorized technician.
This appliance must be installed in accordance with
local and national safety and building regulations by
a suitably qualified engineer. It must only be operated
in a room with sufficient ventilation.
Read the instructions supplied with the appliance be-
fore installing and using it for the first time.
Do not install the tumble dryer in a room where there
is a risk of frost occurring.
Use a suitable fork-lift to transport the dryer to its final
location. Caution. Danger of tipping.
Remove the transport packaging. Unscrew the Torx
T 20 and 30 screws on the wooden pallet and remove
the wooden battens.
Using a suitable fork-lift, raise the dryer and fit the
four feet supplied.

Installation and connection

To ensure suitable access for future maintenance and
service work, please ensure that the minimum distan-
ces between the dryer and the wall specified on the
installation diagram are strictly observed.
17 mm = 11/16"
500 mm = 19 11/16"
626 mm = 24 5/8"
PT 830x
x 5; 10 7/8" (1800 mm)
y 2' 4" (710 mm)
z 3' 7" (1090 mm)
19