Problem Solving Guide; Error Messages; Other Messages - Miele professional PT 8301 SL Mode D'emploi

Problem solving guide

Error messages

Indicator
N 0
N W
The dryer does not start.

Other messages

In the event of any faults please contact the Miele Service Department.
When contacting the Service Department, please quote the Model, Serial number (SN:)
and Material number (M.Nr) of your dryer.
See data plate for details:
The data plate is located at the top of the door aperture
with the door open or at the top of the rear of the machine.
14
Possible cause
Over-pressure in vent ducting.
Leaks in the airways.
Fluff filter blocked
The fluff filter compartment flap is not
closed properly.
Peak load cut-out
The dryer will continue to run without
heating (cold) for the remainder of the
programme.
Remedy
Check the vent ducting.
Call the Miele Service Department.
Clean the fluff filter.
Twist the lock for the fluff filter compartment
flap in a clockwise direction as far as it will
go.
If the peak load cut-out is overridden, the
programme will continue as normal.