Pt 8301 Cop; Control Panel Pt 8301 Profitronic B Cop (Coin Operation); Select A Temperature; At The End Of The Drying Duration - Miele professional PT 8301 SL Mode D'emploi

PT 8301 COP

Control panel PT 8301 Profitronic B COP (Coin Operation)

3
1 Segment display - Time
4 Venting system fault indicator
Time selection can be controlled by a C 4065 or C 4070 coin control unit or other type of payment system.
^ Press the On/Off switch s
^ Load the drum and close the door.

Select a temperature

High
Medium
Low
Cold
^ Press the temperature selection button and select
the required drying temperature - Cold, Low, Me-
dium, High.
The corresponding LED will light up.
Cold For airing textiles
Low Delicates, synthetic fiber and rayon fabric
Medium Minimum iron, synthetic and mixed fiber
fabric
High Cottons, cotton and linen fabric
^ Insert coins or tokens.
The START/STOP button will start flashing.
^ Press the START/STOP button.
14
1 2
4 5 6
2 Program sequence display
5 Lint filter fault indicator
3 Temperature selection button
6 START/STOP button

At the end of the drying duration

!
Drying
L
Cooling down
O
Program finished / Anti-crease
At the end of the drying duration the "Drying" and
"Program finished" program sequence stage symbols
will flash. "Cooling down" will light up and the cooling
down phase will begin.
^ Remove the laundry (the laundry will still be hot).
!
Drying
L
Cooling down
O
Program finished / Anti-crease
At the end of the cooling down phase all three pro-
gram stage symbols will flash and the buzzer will
sound.
^ Remove the laundry.
Interrupt the program by opening the drum door or
the lint filter compartment flap:
^ Continue the program by closing the drum door/lint
filter compartment flap and pressing the
START/STOP button.
7
7 On/Off switch