Installation And Connection - Miele professional PT 8301 SL Mode D'emploi

Installation and connection

This dryer must only be installed and
commissioned by a Miele Service technician.
This appliance must be installed in accordance with
local and national regulations. It must only be
operated in a room with sufficient ventilation.
Read the instructions supplied with the appliance
before installing and using it for the first time.
Do not install the tumble dryer in a room where there
is a risk of frost occurring.
Use a suitable fork-lift to transport the dryer to its final
location. Caution. Danger of tipping.
Remove the transport packaging. Unscrew the Torx T
20 and 30 screws on the wooden pallet and remove
the wooden battens.
Using a suitable fork-lift, raise the dryer and fit the
four feet supplied.
16
To ensure suitable access for future maintenance and
service work, please ensure that the minimum
distances between the dryer and the wall specified
on the installation diagram are strictly observed.
PT 830x
x 1800 mm
y 710 mm
z 1090 mm