Setting The Cutting Heights - Gardeo GTDE1842I-2L Traduction Des Instructions D'origine

accordance with prescribed safety
regulations.
If in doubt contact a qualified
electrician or the nearest GARDEO
Service Centre / sav@eco-
repa.com
WARNING! Inadequate extension
cables can be dangerous.
Extension cable, plug and socket
must be of watertight construction
and intended for outdoor use.
Cable connections should be kept
dry and off the ground.
It is recommended for increased
electrical safety to use a Residual
Current Device (RCD) with a
tripping current of not more than 30
mA. Always check your RCD every
time you use it.
The connection lead must be
inspected for signs of damage at
regular intervals and may only be
used if in perfect condition.
If the supply cord is damaged, it
must be replaced by a GARDEO
Service Centre / sav@eco-
repa.com
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
ELECTRICAL SAFETY
Always check that the power
supply corresponds to the
voltage on the rating plate.
suffocation!
DESCRIPTION
This product is intended for domestic lawn mowing.
It is not designed for commercial use.
1. Switch lever
2. Handle top
3. Electrical plug
4. Safety button
5-6. Handle bottom
7. Grass bag
8. Deflector guard
9. Front cover
10. Wheels
11. Cable holder
ASSEMBLY «
The lawn mower is delivered unassembled. The
complete push bar must be assembled before
using the lawn mower. Follow the operating
instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the
machine.
>
The grass catcher
To fit: Raise the rear cover and hitch the grass
catcher on rear of mower.
To remove: grasp and lift rear cover, remove
grass catcher.

SETTING THE CUTTING HEIGHTS

«
Fig C »
Stop, release switch lever
the motor stops before
The blades continue to rotate
is switched off, a rotating
blade can cause injury.
Before you begin to mow, check to ensure that the
blade is not blunt and that none of the fasteners are
damaged. To prevent any imbalance, replace blunt
and/or damaged blades. To carry out this check,
first switch off the motor and pull out the power plug.
do not touch rotating blades
For the first cutting of the season, a high cutting
adjustment should be selected.
Fig A »
and wait until
adjusting height.
after the machine
Caution
40