Adjusting Of The Footrests; Maintenance - Vermeiren Eclips XXL Mode D'emploi

3.6

Adjusting of the footrests

3.6.1 Length of the footrests
L L L L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrests as follow (in eight different positions):
1. Remove the screw
2. Adjust the length of the footrest to a comfortable length.
Tighten the screw ➁ properly.
3.
3.6.2 Depth of the footplate
Adjust the depth of the footplate as follow (in three different positions):
1. Remove the screws
2. Adjust the depth of the footrest to a comfortable position
Position 1: hole 1 and 3
Position 2: hole 2 and 4
Position 3: hole 3 and 5
3. Tighten the screws properly
A
4

Maintenance

For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.be.
2. Loosen the bolts
mechanism can slide over the guide
3. Pull the brake mechanism over the guide
the desired position.
4. Retighten the bolts
5. Check working of the brakes.
6. If necessary repeat the above steps until the
brakes are adjusted well.
.
.
(Fig A)
.
(Fig A)
Page 15
Eclips XXL
2013-04
so the brake
.
.
(Fig A)
.
(Fig B)
to
B