Installation And Adjustment; Tools; Manner Of Delivery - Vermeiren Eclips XXL Mode D'emploi

To transport the wheelchair in the car use following steps:
1. Remove footrests and accessories.
2. Store footrests and accessories safely.
3. If possible, fold the wheelchair and remove the wheels.
4. Place the wheelchair in the luggage place.
5. If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren Lightweight wheelchairs Eclips XXL has been designed entirely for your
comfort. This wheelchair can be adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L L L L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L L L L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.
•
Wrench set n° 10 to n° 19
•
Allen key set n° 4 to n° 5
•
Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren Eclips XXL shall be delivered with:
•
1 frame with arm supports, rear and front wheels
•
1 pair footrests
•
Anatomical seat (fixed)
•
Anatomical back (fixed)
•
Tools
•
Manual
•
Accessories
When you receive the wheelchair, please check that the product supplied is complete and
fully functional. Warranty claims are only valid if the manufacturer (supplier) is notified in
writing within a period of two weeks. In the case of any defect that is not immediately
evident, warranty claims are only valid if the manufacturer (supplier) is notified in writing
within two weeks after it is detected.
Page 13
Eclips XXL
2013-04