Maintenance And Care; Cleaning; Frame; Shade Tensioning - Glatz AMBIENTE Instructions De Montage Et D'emploi

6. MAINTENANCE AND CARE

6.1 Cleaning

The cloth can be cleaned with lukewarm water with fine detergent. Use
a sponge or soft brush. Rinse down wit ample clear water. If necessary
re-impregnate with a proprietary spray.
In the event of heavy rain, new shades may let a little spray through.
This phenomenon will disappear again after a few days.

6.2 Frame

The frame can be rubbed down with water. The coating colours can be
freshened up with car polish. Paint damage can be made good using
the paint repair kit available from Glatz.

6.3 Shade tensioning

A well tensioned shade is more stable in the wind and remains lovely
longer. If necessary, the roof strut extensions (1) can be pulled out
further. This is best done when the shade is half closed. Insert the stop
screws (2) accordingly and screw it.
1
2

6.4 Hibernation

Store the sunshade on a dry place.
Check the product visually and the proper functions before re-fitting.

6.5 Prior to start-up

Ensure that the pivot and slide bearings are running smoothly:
• Use a non-staining glide spray.
• Guide grooves on the pole (1).
• Corners of the pole inside (2). To this end, unscrew and then
remount the covering plate (3).
3
Fig. 13
If any deformations, tears or wobbly connecting
points should appear as a result of exposure to
extreme strains, the sunshade should undergo an
overhaul by a specialist before being put into use.
2
1
Fig. 14
EN
|
21