Glatz AMBIENTE Instructions De Montage Et D'emploi page 20

EN
|
20
5.3.2 Correct winding-up of umbrella
Avoid clamping, abrasions and premature wear and tear caused by
strong flapping of the material in the case of wind.
(1) After closing the umbrella, pull out all the lengths of material
individually and completely between the struts.
(2) Wind up the lengths of material in tight layers on the umbrella pole.
(3) With the provided belt, secure the wound-up lengths of fabric well.
(The material should not flap in the wind)
5.3.3 Regions affected by frequent wind or strong winds
In autumn, after the end of the season, dismantle the umbrella and
store in a dry place.
5.3.4 Erecting of new umbrellas
Do not erect new umbrellas in autumn. Only set up new umbrellas in
spring before the start of the season.
5.3.5 Using the protective cover (option)
The protective cover should be completely closed and tied with rope.
You should avoid letting the protective cover flap about.
1
2
Fig. 11
3
Fig. 12