Separett Cindi Basic 1229-02 Mode D'emploi page 89

Starting the toilet
Make sure the toilet is fully operational and that there is no visible damage to the control panel
(display) or power plug. To facilitate the start-up of the toilet, do not connect the toilet to the venti-
lation pipe straight away. Instead position the toilet so that the power plug is easily accessible, and
the display is visible.
For the toilet to be used, the power cord must be connected to the wall socket. First make sure that
no damage is found on the cable. Then plug the cord into the wall socket.
After switching on, the display will show 0.0.0.0. After a few seconds, the text rdY appears.
Connecting ventilation
After the toilet has started and rdY is visible on the display, the toilet is ready to be connected to
the ventilation pipe. Once the toilet has been connected to the ventilation pipe, it is ready to use.
17