Before First Time Use; Installation; Location Of The Toilet - Separett Cindi Basic 1229-02 Mode D'emploi

Before first time use

Read the user manual carefully
In order to use and maintain the toilet properly, it is important that everyone using the
toilet has read and understood the contents of the user manual.
Before using the toilet, it is important that the following steps are performed to ensure the proper
functioning of the toilet.

Location of the toilet

The toilet should be placed in a room that has at least one exterior wall to ensure a flow of
incoming air. No other type of ventilation or fan should be installed in the same room as the toilet.
The toilet should be placed on fuse group (min 10A) which is not connected to fuses that are
shared with other products requiring a lot of electricity such as dishwashers, water heaters, ovens,
etc.
The toilet should be connected to an earthed socket (230V) and we recommend using a ground
fault switch on the toilet's power supply.
The toilet's air inlet must not be obstructed by placing carpets or step stools in front of the toilet.

Installation

The toilet is supplied with an installation manual. Before use, ensure that the installation is done
correctly. For the toilet to work properly, it is important that heat and smoke is expelled through
the ventilation pipes and that fresh air is accessible through a fresh air valve mounted on the
exterior wall of the house.
Any installation that does not comply with the instructions in the installation manual may result in
the following:
• The toilet overheating
• Smoke being dispersed into the room
• Incomplete incineration
• Damage to the toilet's electronic systems
• Increased wear and tear on the toilet's components
• Void warranty
16