Kroll W 12 VA Mode D'emploi page 15

W 12 VA
The machine mustn't be moved when being hot and used; if necessary, first stop the unit, and then move it.
9. Cleaning and maintenance
Clean the painted surface with a soft and wet dishcloth. Only use the detergent applicable for paints. Do not
use any scraping cloth or corrosive detergent.
Do not pollute the burner.
1. Close the bottle valve.
10. Short instruction
Ignition
1. Open the gas bottle;
2. Turn the pushbutton of the control valve clockwise between the maximum and minimum values;
3. Press the button and do not release it;
4. Press the ignition button frequently until the flame produces;
5. Press the control button for 5 to 10 seconds when the flame produces;
6. Loosen the control button and ensure that the flame still burns;
7. Please repeat the steps from 3 to 6 when the flame doesn't produce;
8. Regulate the control button according to the requirements.
Flameout
1. Turn the control button to Position "0" around the flame until the burner goes out.
Check whether the flame is really out or not.
2. Close the bottle valve.
15