Service Parameters; Using "0000" To Enter The Calibration Parameter - Adam Equipment GBC Série Notice D'utilisation

12.0 SERVICE PARAMETERS
12.1 USING "0000"

Press the [Tare] key during the display counting when turned on. The
display will ask for a code number, "Pin " on the Weight Display.
 Enter the number 0000 when "Pin " is displayed and then press [Tare].
If another PIN number has been previously stored enter that number
instead.
 The displays will show the first parameters, called "F1" "CAL".

To select another parameter press the [U.Wt./Units] key to advance
through the parameters.

Press the [Tare] key to enter a parameter.

To exit a parameter, press the [Zero] key.

The Weight window will show the parameter number and the Unit Price
and Count windows will show the word describing the function.

When a parameter is entered by pressing the [Tare] key, the displays
will guide you through the parameter selected and the options
available.
The parameters available are:
"F1"
"CAL"
"F2" "Pin"
"F3" "Unit"
TO ENTER THE
To enter the Calibration
To set a new Pin number for access
Enable Weighing Units
CALIBRATION PARAMETER
© Adam Equipment Company 2011