Maintenance Schedule; Maintenance - Honda EU10i Manuel De L'utilisateur

The purpose of the maintenance and adjustment schedule is to keep the
generator in the best operating condition.
Inspect or service as scheduled in the table below.
Make sure the engine is off before you begin any maintenance or repairs.
This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.
• Burns from hot parts. Let the engine and exhaust system cool before
touching.
• Injury from moving parts. Do not run the engine unless instructed to do
so.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler while it
is hot. Let the engine cool before maintenance.
CAUTION:
Use Honda Genuine parts or their equivalent. The use of replacement parts
which are not of equivalent quality may damage the generator.

Maintenance Schedule

REGULAR SERVICE PERIOD (1)
Perform at every indicated month or
operating hour interval, whichever
comes first.
Item
Engine oil
Air cleaner
Spark plug
Valve clearance
Combustion chamber
Fuel tank & filter
Fuel tube
NOTE:
(1) For commercial use, log hours of operation to determine proper maintenance intervals.
(2)Service more frequently when used in dusty areas.
(3) These items should be serviced by your servicing dealer, unless you have the proper tools and
are mechanically proficient. Refer to the Honda shop manual for service procedures.
Each
use
Check level o
Change
Check o
Clean
Check-adjust
Replace
Check-adjust
Clean
Clean
Check

8. MAINTENANCE

First Every
month 3 months
or or
10 hrs. 50 hrs.
o
o (2)
After every 300 hrs. (3)
Every year (3)
Every 2 years (Replace if necessary) (3)
Every Every
6 months 2 years
or or
100 hrs. 300 hrs.
o
o
o
o (3)
Page
16
40
20
41
42
–
–
–
–
39