Maintenance - Honda EM25 Manuel De L'utilisateur

The purpose of the maintenance and adjustment schedule is to keep
the generator in the best operating condition.
Inspect or service as scheduled in the table below.
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.
• Burns from hot parts. Let the engine and exhaust system cool before
touching.
• Injury from moving parts. Do not run the engine unless instructed to
do so.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before maintenance.
CAUTION:
Use Honda Genuine parts or their equivalent. The use of replacement
parts which are not of equivalent quality may damage the generator.
Maintenance Schedule
REGULAR SERVICE PERIOD (3)
Perform at every indicated
month or operating hour
interval, whichever comes first.
Item
Engine oil
Air cleaner
Sediment cup
Spark plug
Valve clearance
Combustion
chamber
Fuel tank and filter
Fuel tube
NOTE:
* Replace paper element type only.
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your servicing dealer, unless you have the proper
tools and are mechanically proficient. Refer to the Honda shop manual for service
procedures.
(3) For commercial use, log hours of operation to determine proper maintenance
intervals.
Each
use
Check level
Change
Check
Clean
Replace
Clean
Check-adjust
Replace
Check-adjust
Clean
Clean
Check

8. MAINTENANCE

Every
First
3
month
months
or
or
20 hrs.
50 hrs.
o
o
o
o (1)
After every 500 hrs. (2)
Every 2 years (Replace if necessary) (2)
Every
Every
6
year
months
or
or
300 hrs.
100 hrs.
o
o*
o
o
o
o (2)
o (2)
Page
14
34
18
35
37
39
–
–
–
–
33