Wolf Garten UV 32 EV Mode D'emploi page 23

- Betrieb
- Messa in opera
- In werking stellen
GB
Adjust operating depth
Only with motor switched off and non-mowing aeriating roller. The
operating depth must be adjusted to the corresponding grass and
ground conditions.
● Move operating lever towards front.
● Adjust operating depth with turn handle to the desired depth (+).
Aeriating test:
- Pull operating lever up again.
- Start tool.
- Push operating lever slowly forward.
- Move tool slowly into operating direction.
- On hearing stones being hit or blocking of the motor immedia-
tely switch off tool.
- Turn rotating handle 1–2 rotations towards the left (–).
(One revolution corresponds to 1,5 mm.)
- Start aeriating test again.
● When used regularly the aeriating depth may be adjusted accor-
ding to the wear of the blade.
Recommended working heights:
Lawn condition
well-kept lawns with stone-free,
soft ground
stony, untidy lawns
unkempt, extremely mossy lawns
-
-
Working position
Set tool exactly to ground height
Set tool to ground height
● Increase working height if stones
● Start with a high working height
● Do not overload appliance
● Cut vertically and crossways
● Re-sow with WOLF Loretta lawn
23
Utilisation
Operation
are thrown up
- increase working height if motor
blocks
several times
seeds
-
-