Spypoint TINY-D Manuel De L'utilisateur page 8

14
RESOLUTION 2.0 GB
4 MP 1900
6 MP 1580
8 MP 1190
10 MP 950
12 MP 790
VIDEO RESOLUTION
320 x 240 45 min
640 x 480 30 min
"BUSY" LED
The "BUSY" light, located beside the LCD screen, lights up
when the camera records a file.
PROGRAMMING
Turn on the camera to navigate in the interface by pressing
"" or "" and press "OK" for selection. To modify the
selection, press "" and "" again and press "OK" to
confirm. To return to the previous menu press "".
PHOTO
To take pictures. The "Photo" mode must be selected by
pressing "OK"; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
4.0 GB 8.0 GB 32 GB
3800 7600 30400
3160 6320 25280
2380 4760 19040
1900 3800 15200
1580 3160 12640
1h30 3h 12h
1h 2h 8h
VIDEO
To take videos. The "Video" mode must be selected by
pressing "OK"; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
TEST
To set the camera or the distance. When "Test" mode is
selected, no picture or video is recorded. Walk perpendicularly
in front of the camera. When the camera detects movement,
the light winks to indicate that normally, a photo or video
would have been recorded. If the system does not detect
the movement, increase the distance detection using the
"Settings" menu (the option "Sensitivity" allows the user
to set the sensitivity to "High", "Medium" or "Low"). You
can also realign the camera differently. Once you understand
how the device responds to detections, you can better adjust
the direction or the height of the camera (Recommanded
installation height: about 3 feet).
In "Test" mode, it is possible to take a picture by pressing
the "OK" button. The photo is saved and appears in
"View" mode.
15