Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
Note: when using the electricity power, the
"Multi-shot" mode and the "Delay" between
photos are disabled as the camera starts
instantly every time it detects motion. Also,
the imprinting temperature on each picture is
disabled.
Infrared:
Allow the user to choose how many LEDs
(On/One LED/Off)
will be turned on.
On: Every LEDs work when taking photos
or videos at night.
One LED: Only a single LED works (see
figure). This option can be useful when using
an IR-Booster/Black flash IR-Booster (sold
separately, refer to the section "OPTIONS").
Off: LEDs are deactivated so your night
photos or videos are pitched black.
LED for
infrared
sensor
TINY-D
Side Sensors:
When the side sensors are activated, a total
(On/Off)
of 7 zones is covered. The central sensor
covers 5 zones. The side detectors are mainly
used to prepare the camera so when your
target passes through the central sensor, the
system is already pre triggered, increasing
greatly the reaction time of your camera.
Note: The side sensors require more battery
power.
s: side sensors
c: central sensor
Viewing angle
30°
40°
Camera
Detection angles
30'
(9m)
26'
70°
(8m)
50'
Detection distance
(central)
(15m)
Detection distance
of the side sensors
21
Publicité
Table des Matières
